|
|
 |
| An Admiral series
steering kit is basically determined by:
1. type of drive you have ie. outboard, inboard,
stern drive, or jet drive
2. available space to mount the cylinder
3. engine's horsepower
To help you make your selection from the
Admiral series kits listed below, click on the
Dimensions
page to view drawings that will provide you with
the minimum space requirement for each type of
cylinder.
|
|
 |
 |
|
|
| This kit contains
the 210Bull Horn (210BH) cylinder which
mounts very simply to the tilt-tube
of the outboard motor and fits neatly
under the front of the motor cowling.
It is compact in design and requires
only a small amount of clearance (615mm).
This unit comes in a kit for a single
station monohull- however other variations
are available for cats, dual stations. |
|
|
|
|
 |
|
|
| This kit contains
the 210T (balanced) side mount steering
cylinder and is a very popular cylinder
for outboards and stern drives. It can
handle the same horsepower as the powerful
210BH cylinder, but is simpler and cheaper
to install. The cylinder is designed
to screw directly onto the outboard
motor's tilt-tube or pivot-tube in exactly
the same way as conventional cable steering.
Simply unscrew the old cable from the
motor, screw on the HyDrive cylinder
onto the same thread, install the fittings.
It can also be fitted directly to splashwell
brackets to replace any cable steering.
It's really that simple. |
|
|
|
|
 |
|
|
|
This kit contains the 210TSE (unbalanced)
side mounted steering cylinder and
is the same as the OBKIT2 cylinder
however its advantage is that it requires
less clearance for installation.
|
|
|
|
|
 |
|
|
|
This kit contains the 210DE double
ended cylinder with single mount suitable
for twin engines.
|
|
|
|
|
 |
|
|
|
The new release HyDrive Model 216FM
cylinder is designed to fit all brands
of single or twin V4 and V6 outboards.
It offers the advantage of rigid mounting
directly in front of the motor and
the hydraulic hoses remain stationary.
Requiring more well-space than the
"bullhorn" -type cylinder,
it is coated in black polyurethane
and has special non-conductive and
wear resistant rod-guides, offering
maximum protection against electrolysis.
Combined with the Admiral series 101
helm, it offers the ultimate in boat
handling.
|
|
|
|
|
 |
|
|
|
The PROKIT is the same as the OBKIT1
but is specially designed for narrow
engine wells.
|
|
|
|
|
 |
|
|
| The
Hydrive 212T Sport cylinder is a compact,
tube-mount cylinder capable of handling
up to twin 150HP engines (counter rotating)
or a single 175HP engine. It offers
power and the reliability of hydraulic
steering at a price which is more than
competitive with many mechanical systems.
It attaches directly to the outboard
motor's tilt-tube, just like the old
push-pull cable steering. Like the other
tube mount cylinders, it requires only
a little clearance to the side of the
motor to fit: just 315mm.
|
|
|
|
|
|
|
|
|
|
 |
|
|
| Not only
does HyDrive offer the finest quality steering components
for your boat, they also provide the most comprehensive
range of complete packaged kits - just to make it simple
for you to install. HyDrive supply these systems in heavy-duty
outer cartons with everything you need in one box: |
|
- Admiral 101 helm unit with fittings
- Cylinder type of your choice with
all fittings
- 12 mtrs high pressure hydraulic
tubing
- HyDrive ULTRA-15 hydraulic fluid
- Detailed installation instructions
&
owner's manual
- Drill template
- bleed kit
|
|
|
|
|
